How to choose a practical manual tile cutter

Manual tile cutter is a tool that is necessary for cutting tiles. The device of such a device is often the same. The main components of the tile cutter is a cutting element, one or two guides, a floating base and a protractor. And the main part is the cutting roller. The material for its manufacture, as a rule, is carbide steel.

Manual tile cutter

Manual tile cutter is a tool that is used when cutting tiles.

Manual models of tile cutters are designed to work with tiles no more than 15 mm thick. Some tools provide additional features that allow you to adjust it depending on the thickness of the material. As a result, it is possible to limit the progress of the cleaving legs. This helps prevent crumbling of the edge, even if it is necessary to cut the tile diagonally.

Types of manual tile cutters

Depending on the design, there are three main types of tile cutters:

  • roller;
  • mechanical;
  • on bearings.
Roller tile cutter

The scheme of roller tile cutter.

The most common and popular are roller. They are quite easy to manufacture and operate. Mechanical is equipped with a rigid carriage, so that the incision is especially accurate. In addition, such a tool can be used to work with a solid tile type.

Manual tile cutter is designed to work with tiles of less than 15 mm, but if it is necessary to process a highly durable material with a thickness of up to 16 mm, then preference should be given to tile cutters on bearings. In such models, both bearings are equipped with bushings. This allows for maximum softness during cutting.

There are also models of tile cutters with "ballerina". This addition is a circular cutter and is intended for the formation of holes in the material of the desired diameter. This function is used, for example, if it is necessary to provide a recess for a socket or a pipe in a tile.

When choosing a manual tile cutter, you can come across an unusual model in the form of forceps. Outwardly, such a tool is more like pliers. Tweezers are used, as a rule, if there is a need to fit a very small number of tiles. The principle of operation of the tool is the following: using a diamond disk, a cut is made along the enamel of the tile, and then it is broken by a metal corner.

Back to table of contents

Criteria to consider when choosing a tile cutter

There are a number of parameters that are worth paying attention to if you need to choose a manual tile cutter:

Manual Tile Cutter Application

The scheme of the manual tile cutter.

  1. The stiffness of the base. It is better to give preference to a tool with a strong frame. Therefore, when choosing be sure to check the thickness of the metal. After all, if the base is weak, then vibrations may occur during the splitting of the tile and the material will be damaged. An important detail is the handle: the stronger it is, the more powerful the lever will be. This is especially true if you have to work with extremely durable tiles or porcelain stoneware.
  2. The parameters of the tile cutter. The most important indicator is the length. You should not take miniature models - it is better to stay on the universal. First, it can be used to cut tiles for both wall and floor decoration. Secondly, there will be no problems with a diagonal cut. You can, of course, use the grinder for this type of cutting, but there will be a lot of dust.
  3. Smooth progress of the manual tile cutter. Quality tools are made using special bearings that provide the desired smoothness. But if you decide to dwell on a model without bearings, then it is desirable to first try it out or give preference to positive brands.

The best option is testing the model you like. If possible, cut several tiles with the tool.

An ideal tile cutter is one that provides a smooth glide, and the material breaks strictly along the lines drawn. If the result is arranged, then you can buy - such a tool will surely pay for itself.

Back to table of contents

Tile cutters of famous manufacturers

The cost of a manual tile cutter is influenced not only by the quality of the materials included in its composition, but also by the name under which it is produced. Quite popular is the range of tile cutters Rubi. Their distinctive feature - all-steel chrome guides. In some models (for example, TM-70) there is a side stop, which is necessary if re-cutting is performed at an angle of 45 ° or 90 °. Such a tool with little effort to cope with ceramics of large sizes.

Tile cutting

The tile cutter should provide smooth sliding, and the material undergoing cutting should break only along the drawn line.

Matrix tile cutters are equally well known. For the production of the bed using aluminum. A distinctive feature of such tile cutters is a very easy movement of the handle. Also, many models use a special coating that provides good adhesion of the roller to the material.

The highlight of the Sigma tile cutting tools is the splitter handle. It is equipped with a ball bearing and has a damping effect. This combination allows to achieve high power, which is extremely important when working with particularly hard materials, without losing the smoothness of the course. Many models of this company are equipped with a wing-base for more convenient use.

Tile cutters of the firm "Monolith" are able to withstand very large volumes. The design of these tools is such that when working with them a perfect cut is possible even on tiles with a thickness of 20-25 mm. And the lack of crumbling is provided by adjusting the movement of the legs. Those craftsmen who need to perform circular cuts should consider the tool from Stayer 3310-60. It is equipped with a "ballerina", which allows you to make holes with a diameter of 30-80 mm.

How to choose a tile cutter and whether to overpay for additional features and a well-known name is up to the master to decide. Try to collect as much information about the model you like - and then the purchased item will serve for many years.

Add a comment